Our most versatile general purpose BE Series Reed Relay with many contact configuration options including up to 5 form A switches. Available in latching or high IR typical 10^13 Ω. Plastic or metal housing, epoxy encapsulated.
The LI series is a high voltage reed relay and high insulation reed relay that is epoxy encapsulated. This high voltage reed relay features a high insulation resistance (IR) >10^13 Ω and is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC. UL approval.
The KT series high voltage reed relay and high insulation reed relay is available in both a surface mount (SMD) or through-hole (THT) design. This high voltage reed relay is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC and features a high insulation resistance (IR) >10^13 Ω. This KT series is supplied in a rugged thermoset overmolded package. Tested in accordance with AEC-Q200, UL listed.
SHV簧片继电器是一个内联和高签证官ltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.
Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
Ultraminiature 8-pole low profile through hole mount (THT) RM05-8A-SP Series Reed Relay module with standard dual in-line (DIL) pin-out (2mm raster) and integrated magnetic shield for high density board mounting. Equipped with an 8-channel relay driver with MAX4823 with kickback protection and parallel activation electronics. Designed to significantly reduce PCB space at 24% smaller than our RM05-8A, saves on wiring costs, and assembly costs.
General purpose line sensing dual in-line DIL Series Reed Relay with coil up to 11.000 Ω. Supplied in an epoxy encapsulated package. Available with dielectric strength 4.25kVDC. Optional diode and magnetic shield. UL approval.
The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package. The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
The 4-pole RM05-4A series is an (RF) high frequency reed relay packaged as a low profile, (SMD) surface mount reed relay module. This RF reed relay is capable of switching beyond 5.5 GHz with <40ps rise times for switching fast pulses.
The single in-line SIL RF series high frequency reed relay is capable of switching signals from DC to 1.5GHz. This instrumentation grade RF reed relay is supplied in a rugged thermoset overmolded package. Utilizes minimum PCB area at only 50% compared to our DIP and DIL series. Available with dielectric strength 4kVDC. Optional diode and magnetic shield. UL approval.
The HF series high frequency reed relay and high power reed relay is capable of carry currents of 5A@30MHz. Specially packaged coil with a PCB pin out for the coil only. This high frequency reed relays’ switch contacts are available for direct wiring (sky wiring). Equipped with a patented external electrostatic and magnetic shield. RF reed relay has a breakdown voltage up to 9kVDC.
The H Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC. This high voltage reed relay is designed with a specially packaged coil with a PCB pin out for the coil only. The switch contacts are available for direct wiring (sky wiring). Replacement for mercury wetted relay.
The HE Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC. Leakage distance >26mm. This high voltage reed relay is epoxy encapsulated with many PCB pin configurations available. Options include high voltage wires available for direct wiring of the high voltage leads. Replacement for mercury wetted relay.
The HM Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC with a leakage distance >32mm. This high voltage reed relay is epoxy encapsulated with many PCB pin configurations available. Options include high voltage wires available for direct wiring of the high voltage leads. Replacement for mercury wetted relay. Latching version also available.
High voltage/high insulation open-frame HI Series Reed Relay with high leakage distance. High Insulation Resistance (IR) >10^14 Ω.
Low thermal epoxy encapsulated BT/BTS Series Reed Relay capable of switching offset voltages <1µV with a 100% duty cycle. This extremely low thermal voltage is achieved through an optimized temperature balance between the reed switches and minimum coil power. An excellent choice over semiconductor devices.
The SMP-21 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 40V AC or peak DC, in a very SOP (small-outline package). It also features a low output capacitance of 13pF and a low off-state leakage current of 10nA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-21 Photo-MOSFET Relay series ideal in many applications.
The SMP-23 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 250V AC or peak DC, in a very SOP (small-outline package). It also features a low output capacitance of 37pF and a low off-state leakage current of 10nA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-23 Photo-MOSFET Relay series ideal in many applications.
The SMP-30 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 400V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 52pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-30 Photo-MOSFET Relay series ideal in many applications.
The SMP-31 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 350V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 55pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-31 Photo-MOSFET Relay series ideal in many applications.
The SMP-36 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 60V AC or peak DC, in a very small SMD (surface mount design), or DIP (dual-in-line package). It also features a high peak load current of 6 Amps and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-36 Photo-MOSFET Relay series ideal in many applications.
的SMP-37 Photo-MOSFET solid-st继电器系列ate relay featuring switching up to 60V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 45pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-37 Photo-MOSFET Relay series ideal in many applications.
The SMP-38 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 600V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 47pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-38 Photo-MOSFET Relay series ideal in many applications.
The SMP-40 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 1500V AC or peak DC, in a very small SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 83pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-40 Photo-MOSFET Relay series ideal in many applications.
The SMP-45 Photo-MOSFET Relay series is a general purpose solid-state relay featuring switching up to 60V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 1.3pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-45 Photo-MOSFET Relay series ideal in many applications.
The SMP-47 Photo-MOSFET Relay series is a solid-state relay featuring switching up to 80V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a high peak load current of 3 Amps and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-47 Photo-MOSFET Relay series ideal in many applications.
The SMP-74 Photo-MOSFET Relay series is a general purpose Form B solid-state relay featuring switching up to 400V AC or peak DC, in a very small SOP (small-outline package), SMD (surface mount design), or DIP (dual-in-line package). It also features a low output capacitance of 1.3pF and a low off-state leakage current of 1μA.Photo-MOSFET Relaysalso feature fast switching, no contact bounce, low noise, impervious to dirty environments, shock/vibration proof, extremely high input to output isolation, control low-level analog signals to high-level loads: (LED’s, relays, lamps, solenoids). The added benefit of stable on resistance, long life and high reliability make the SMP-74 Photo-MOSFET Relay series ideal in many applications.
Our most versatile general purpose BE Series Reed Relay with many contact configuration options including up to 5 form A switches. Available in latching or high IR typical 10^13 Ω. Plastic or metal housing, epoxy encapsulated.
The LI series is a high voltage reed relay and high insulation reed relay that is epoxy encapsulated. This high voltage reed relay features a high insulation resistance (IR) >10^13 Ω and is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC. UL approval.
The KT series high voltage reed relay and high insulation reed relay is available in both a surface mount (SMD) or through-hole (THT) design. This high voltage reed relay is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC and features a high insulation resistance (IR) >10^13 Ω. This KT series is supplied in a rugged thermoset overmolded package. Tested in accordance with AEC-Q200, UL listed.
SHV簧片继电器是一个内联和高签证官ltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.
Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
Ultraminiature 8-pole low profile through hole mount (THT) RM05-8A-SP Series Reed Relay module with standard dual in-line (DIL) pin-out (2mm raster) and integrated magnetic shield for high density board mounting. Equipped with an 8-channel relay driver with MAX4823 with kickback protection and parallel activation electronics. Designed to significantly reduce PCB space at 24% smaller than our RM05-8A, saves on wiring costs, and assembly costs.
General purpose line sensing dual in-line DIL Series Reed Relay with coil up to 11.000 Ω. Supplied in an epoxy encapsulated package. Available with dielectric strength 4.25kVDC. Optional diode and magnetic shield. UL approval.
The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package. The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
The 4-pole RM05-4A series is an (RF) high frequency reed relay packaged as a low profile, (SMD) surface mount reed relay module. This RF reed relay is capable of switching beyond 5.5 GHz with <40ps rise times for switching fast pulses.
The single in-line SIL RF series high frequency reed relay is capable of switching signals from DC to 1.5GHz. This instrumentation grade RF reed relay is supplied in a rugged thermoset overmolded package. Utilizes minimum PCB area at only 50% compared to our DIP and DIL series. Available with dielectric strength 4kVDC. Optional diode and magnetic shield. UL approval.
The HF series high frequency reed relay and high power reed relay is capable of carry currents of 5A@30MHz. Specially packaged coil with a PCB pin out for the coil only. This high frequency reed relays’ switch contacts are available for direct wiring (sky wiring). Equipped with a patented external electrostatic and magnetic shield. RF reed relay has a breakdown voltage up to 9kVDC.
The H Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC. This high voltage reed relay is designed with a specially packaged coil with a PCB pin out for the coil only. The switch contacts are available for direct wiring (sky wiring). Replacement for mercury wetted relay.
The HE Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC. Leakage distance >26mm. This high voltage reed relay is epoxy encapsulated with many PCB pin configurations available. Options include high voltage wires available for direct wiring of the high voltage leads. Replacement for mercury wetted relay.
The HM Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC with a leakage distance >32mm. This high voltage reed relay is epoxy encapsulated with many PCB pin configurations available. Options include high voltage wires available for direct wiring of the high voltage leads. Replacement for mercury wetted relay. Latching version also available.
High voltage/high insulation open-frame HI Series Reed Relay with high leakage distance. High Insulation Resistance (IR) >10^14 Ω.
Low thermal epoxy encapsulated BT/BTS Series Reed Relay capable of switching offset voltages <1µV with a 100% duty cycle. This extremely low thermal voltage is achieved through an optimized temperature balance between the reed switches and minimum coil power. An excellent choice over semiconductor devices.
The MRX Series is an ATEX approved reed relay according to PTB-01 ATEX 2050 U and is used for the galvanic separation of intrinsic safety and non-intrinsic safety circuits in hazardous locations. The MRX ATEX approved reed relays are also suitable for circuits of the category “ia” due to its peak voltage of 375 Voltage. Switching configuration with up to 4 form A switches or 2 form C switch.
Type of protection: II (1) G [EEx ia] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
Note: The product series is currently being upgraded to the latest ATEX and IECEx standards. The expected issue date of the new certificate is middle of the year 2019.
Our most versatile general purpose BE Series Reed Relay with many contact configuration options including up to 5 form A switches. Available in latching or high IR typical 10^13 Ω. Plastic or metal housing, epoxy encapsulated.
The KT series high voltage reed relay and high insulation reed relay is available in both a surface mount (SMD) or through-hole (THT) design. This high voltage reed relay is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC and features a high insulation resistance (IR) >10^13 Ω. This KT series is supplied in a rugged thermoset overmolded package. Tested in accordance with AEC-Q200, UL listed.
Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
General purpose line sensing dual in-line DIL Series Reed Relay with coil up to 11.000 Ω. Supplied in an epoxy encapsulated package. Available with dielectric strength 4.25kVDC. Optional diode and magnetic shield. UL approval.
The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package. The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
SHV簧片继电器是一个内联和高签证官ltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.
Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
Ultraminiature 8-pole low profile through hole mount (THT) RM05-8A-SP Series Reed Relay module with standard dual in-line (DIL) pin-out (2mm raster) and integrated magnetic shield for high density board mounting. Equipped with an 8-channel relay driver with MAX4823 with kickback protection and parallel activation electronics. Designed to significantly reduce PCB space at 24% smaller than our RM05-8A, saves on wiring costs, and assembly costs.
The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package. The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
The single in-line SIL RF series high frequency reed relay is capable of switching signals from DC to 1.5GHz. This instrumentation grade RF reed relay is supplied in a rugged thermoset overmolded package. Utilizes minimum PCB area at only 50% compared to our DIP and DIL series. Available with dielectric strength 4kVDC. Optional diode and magnetic shield. UL approval.
The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package. The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
The 4-pole RM05-4A series is an (RF) high frequency reed relay packaged as a low profile, (SMD) surface mount reed relay module. This RF reed relay is capable of switching beyond 5.5 GHz with <40ps rise times for switching fast pulses.
The single in-line SIL RF series high frequency reed relay is capable of switching signals from DC to 1.5GHz. This instrumentation grade RF reed relay is supplied in a rugged thermoset overmolded package. Utilizes minimum PCB area at only 50% compared to our DIP and DIL series. Available with dielectric strength 4kVDC. Optional diode and magnetic shield. UL approval.
The HF series high frequency reed relay and high power reed relay is capable of carry currents of 5A@30MHz. Specially packaged coil with a PCB pin out for the coil only. This high frequency reed relays’ switch contacts are available for direct wiring (sky wiring). Equipped with a patented external electrostatic and magnetic shield. RF reed relay has a breakdown voltage up to 9kVDC.
Our most versatile general purpose BE Series Reed Relay with many contact configuration options including up to 5 form A switches. Available in latching or high IR typical 10^13 Ω. Plastic or metal housing, epoxy encapsulated.
The LI series is a high voltage reed relay and high insulation reed relay that is epoxy encapsulated. This high voltage reed relay features a high insulation resistance (IR) >10^13 Ω and is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC. UL approval.
The KT series high voltage reed relay and high insulation reed relay is available in both a surface mount (SMD) or through-hole (THT) design. This high voltage reed relay is capable of switching up to 1kVDC, breakdown voltage of 4.2kVDC, isolation voltage to 7kVDC and features a high insulation resistance (IR) >10^13 Ω. This KT series is supplied in a rugged thermoset overmolded package. Tested in accordance with AEC-Q200, UL listed.
SHV簧片继电器是一个内联和高签证官ltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.
The H Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC. This high voltage reed relay is designed with a specially packaged coil with a PCB pin out for the coil only. The switch contacts are available for direct wiring (sky wiring). Replacement for mercury wetted relay.
The HE Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC. Leakage distance >26mm. This high voltage reed relay is epoxy encapsulated with many PCB pin configurations available. Options include high voltage wires available for direct wiring of the high voltage leads. Replacement for mercury wetted relay.
The HM Series high voltage reed relay is capable of switching up to 10kVDC and breakdown voltage of 15kVDC with a leakage distance >32mm. This high voltage reed relay is epoxy encapsulated with many PCB pin configurations available. Options include high voltage wires available for direct wiring of the high voltage leads. Replacement for mercury wetted relay. Latching version also available.
The MRX Series is an ATEX approved reed relay according to PTB-01 ATEX 2050 U and is used for the galvanic separation of intrinsic safety and non-intrinsic safety circuits in hazardous locations. The MRX ATEX approved reed relays are also suitable for circuits of the category “ia” due to its peak voltage of 375 Voltage. Switching configuration with up to 4 form A switches or 2 form C switch.
Type of protection: II (1) G [EEx ia] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
Note: The product series is currently being upgraded to the latest ATEX and IECEx standards. The expected issue date of the new certificate is middle of the year 2019.
微型电522系列光耦合器separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 0.5, cutoff 85kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 12mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
IECEx Certificate of Conformity
Mounting Instructions for 522 Optocoupler Series
525 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 0.5, cutoff 50kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 14.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
IECEx Certificate of Conformity
Mounting Instructions for 525 Optocoupler Series
535 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 3.0, cutoff 2kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 14.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
IECEx Certificate of Conformity
Mounting Instructions for 535 Optocoupler Series
567 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, cutoff 500kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 14mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
Low thermal epoxy encapsulated BT/BTS Series Reed Relay capable of switching offset voltages <1µV with a 100% duty cycle. This extremely low thermal voltage is achieved through an optimized temperature balance between the reed switches and minimum coil power. An excellent choice over semiconductor devices.
微型电522系列光耦合器separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 0.5, cutoff 85kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 12mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
IECEx Certificate of Conformity
Mounting Instructions for 522 Optocoupler Series
525 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 0.5, cutoff 50kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 14.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
IECEx Certificate of Conformity
Mounting Instructions for 525 Optocoupler Series
535 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 3.0, cutoff 2kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 14.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
ATEX Examination Certificate & Assessment Report
IECEx Certificate of Conformity
Mounting Instructions for 535 Optocoupler Series
567 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, cutoff 500kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 14mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Type of protection: II (1) G [Ex ia Ga] II C
按照:EN 60079 - 0, EN 60079 - 11
521系列电separatio光耦合器n of intrinsic safety circuits, Isolation voltage min. 6kVDC, CTR min. 0.5, cutoff 50kHZ. Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 24.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
528 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage min. 10kVDC, CTR min. 0.9, cutoff 50kHZ. Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 42mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
530-03 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage up to 20kVDC, CTR min. 0.5 (50%), cutoff 50kHZ. Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements min. 34mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
530-70 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage min. 22kVDC, CTR min. 0.8%, cutoff 100kHZ. Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements min. 39mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.
Ultraminiature 8-pole low profile through hole mount (THT) RM05-8A-SP Series Reed Relay module with standard dual in-line (DIL) pin-out (2mm raster) and integrated magnetic shield for high density board mounting. Equipped with an 8-channel relay driver with MAX4823 with kickback protection and parallel activation electronics. Designed to significantly reduce PCB space at 24% smaller than our RM05-8A, saves on wiring costs, and assembly costs.
The 4-pole RM05-4A series is an (RF) high frequency reed relay packaged as a low profile, (SMD) surface mount reed relay module. This RF reed relay is capable of switching beyond 5.5 GHz with <40ps rise times for switching fast pulses.
Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package. The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.
Our most versatile general purpose BE Series Reed Relay with many contact configuration options including up to 5 form A switches. Available in latching or high IR typical 10^13 Ω. Plastic or metal housing, epoxy encapsulated.
Ultraminiature 8-pole low profile through hole mount (THT) RM05-8A-SP Series Reed Relay module with standard dual in-line (DIL) pin-out (2mm raster) and integrated magnetic shield for high density board mounting. Equipped with an 8-channel relay driver with MAX4823 with kickback protection and parallel activation electronics. Designed to significantly reduce PCB space at 24% smaller than our RM05-8A, saves on wiring costs, and assembly costs.
General purpose line sensing dual in-line DIL Series Reed Relay with coil up to 11.000 Ω. Supplied in an epoxy encapsulated package. Available with dielectric strength 4.25kVDC. Optional diode and magnetic shield. UL approval.
The 4-pole RM05-4A series is an (RF) high frequency reed relay packaged as a low profile, (SMD) surface mount reed relay module. This RF reed relay is capable of switching beyond 5.5 GHz with <40ps rise times for switching fast pulses.
High voltage/high insulation open-frame HI Series Reed Relay with high leakage distance. High Insulation Resistance (IR) >10^14 Ω.
